
CK MR140 Water Cooled Micro TIG Torch Kit, 140A, 25', 3-Pc, Super-Flex, MR1425SF
CK MR140 Water Cooled Micro TIG Torch Kit, 140A, 25', 3-Pc, Super-Flex, MR1425SF
- 140 Amps at 100% duty cycle, low profile micro
- 45°, 90° and 180° interchangeable
- Includes Kit AK-MR: 45°, 90° and 180° interchangeable heads, .040" , 1/16" and 3/32" collets, Clear Pyrex Cups (2), Alumina Cup (1), .040" , 1/16" and 3/32" Tungsten, and a

CK MR712SF Micro Torch Pkg 70 AMP. 12.5 FT.SF , 3 Heads,W/TG1-24
CK MR712SF Micro Torch Pkg 70 AMP. 12.5 FT.SF , 3 Heads,W/TG1-24
- 70 Amps at 100% duty cycle, low profile micro
- 45°, 90° and 180° interchangeable
- Two clear Pyrex and one alumina nozzles fit on all three
- Torch is easily manipulated due to SUPER-FLEX Power
- Includes Kit AK-MR: 45°, 90° and 180° interchangeable heads, .040" , 1/16" and 3/32" collets, Clear Pyrex Cups (2), Alumina Cup (1), .040" , 1/16" and 3/32" Tungsten, and a

CK MR70 Air Cooled Micro TIG Torch Kit, 70A, 25', Super-Flex, MR725SF
CK MR70 Air Cooled Micro TIG Torch Kit, 70A, 25', Super-Flex, MR725SF
- 70 Amps at 100% duty cycle, low profile micro
- 45°, 90° and 180° interchangeable
- Includes Kit AK-MR: 45°, 90° and 180° interchangeable heads, .040" , 1/16" and 3/32" collets, Clear Pyrex Cups (2), Alumina Cup (1), .040" , 1/16" and 3/32" Tungsten, and a

CK MR140 Water Cooled Micro TIG Torch Kit, 140A, 12.5', 3-Pc, Super-Fl
CK MR140 Water Cooled Micro TIG Torch Kit, 140A, 12.5', 3-Pc, Super-Fl
- 140 Amps at 100% duty cycle, low profile micro
- 45°, 90° and 180° interchangeable
- Includes Kit AK-MR: 45°, 90° and 180° interchangeable heads, .040" , 1/16" and 3/32" collets, Clear Pyrex Cups (2), Alumina Cup (1), .040" , 1/16" and 3/32" Tungsten, and a

Bernzomatic TS8000 - High Intensity Trigger Start Torch
Bernzomatic TS8000 - High Intensity Trigger Start Torch
- Auto start/stop ignition easily ignites and extinguishes
- Ultra swirl flame provides maximum heat output for large diameter soldering, brazing, heat treating and light
- For best results, use with MAP-Pro fuel, such as the Bernzomatic 14.1 oz. MAP-Pro Hand Torch
- Cast aluminum body construction for
- Pressure regulated for consistent performance when tilted or momentarily
- Adjustable flame control knob for ease in switching between different
- Adjustable flame control knob to easily size flame for different
- Instant on/off trigger igniter with simple one-handed
- Cast aluminum body for
- Lock button keeps torch lit for finger-free

Magic&shell Torch Switch Trigger 2 PCS Torch Flapper Switch Trigger with Micro Switch for TIG Welding Torch and Plasma Cutter Torch
Magic&shell Torch Switch Trigger 2 PCS Torch Flapper Switch Trigger with Micro Switch for TIG Welding Torch and Plasma Cutter Torch
- Made of high quality materials, high sensitivity, fast control and long service
- The structure is simple, stable and reliable, and easy to
- Larger tabbed button for easy pressing with gloves.Use a zip tie to keep it
- Suitable for most TIG torches and plasma
- Line Length: 15 cm/5.9Inch.Package List: 2

2Pcs Torch Switch Trigger with Micro Switch

Torch Switch Trigger with Micro Switch For TIG Welding Torch & Plasma Cutter Torch 2pk

CK TL26 Air Cooled Trim-Line TIG Torch Kit, Flex, 200A, 25', 1-Pc, Super-Flex, TL26-25-RSF FX
CK TL26 Air Cooled Trim-Line TIG Torch Kit, Flex, 200A, 25', 1-Pc, Super-Flex, TL26-25-RSF FX
CK TL26 Air Cooled Trim-Line TIG Torch Kit, Flex, 200A, 25', 1-Pc, Super-Flex, TL26-25-RSF FXCK Worldwide Part # TL26-25-RSFFX• Trim-Line torches significantly reduce the size and weight of your torch while maintaining similar amperage capacity.• Larger coolant passage in head• Flex head a maximum of 40 degrees from centerline. See below for more details and recommendations.• 3 Series Head AccessoriesCK Worldwide offers a complete line of industry standard torch models. Standard features include: Brass instead of copper head (eliminate seizing, stripping or galling of threads) Fail-Safe hose fittings (no wire ties required) Silicon rubber insulation provides best protection against high frequency leakage WARNING: Do not start bending your torch right out of the box! Strike a couple of arcs to warm up the coils inside the torch body for easier bending. Once warmed up, you are ready for bending the flexible area, generally, the area between where the handle starts and just about 1/2″ before the head. Maximum 40 degrees from centerline. Keep amount of flexes to a minimum. Spread bend over entire neck of torch. Amperage: 200 AmpCable Type: 1-Piece Super-Flex Rated Output: 200 Amp ACHF or DCSP Type: Air Cooled Head Style: Flex Head without Valve Consumable Series: 3 Series Torch Style: Trim-LineLength: 25 ft.Torch Series: TL26Gas Valve: Does Not Have Gas Control ValveWhat Series is my Torch? Knowing the series of your torch takes the guess work out of finding consumables and replacement parts.2 Series: torches includes 9, 20, 100, 110, 130, 200, 230FL2L, CKM230, CWH230, WCM230 torches and other popular torches of Weldcraft, Lincoln, WeldTec and Profax with similar models.3 Series: torches include 17, 18, 26, 150, 210, 300, 510, Trimline, FL3L, CKM350, CWHTL300, CWH350, CWM350 and other popular torches of Weldcraft, Lincoln, WeldTec and Profax with similar models.4 Series: stubby consumables are compatible with 17, 18, 26, 150, 210, 300, 510 Trimline, FL3L, CKM350, CWHTL300, CWH350, CWM350 torches.51 Series: consumables are compatible with the CK510 torches.8 Series: torches include 24, 24W, 80, 90, 180, CWH180, CK24W.
-
200 Amp 200 Amp 1-Piece Super-Flex Flex Head without Valve Does Not Have Gas Control Valve

WP20-25R TIG TORCH TIGMASTER WATER-COOLED 250AMP - MADE IN USA
WP20-25R TIG TORCH TIGMASTER WATER-COOLED 250AMP - MADE IN USA
WP-20-25R Style TIG Torch TIGMASTER Water-Cooled 250A 25 Use the one the professionals use •250 Amp Water-Cooled •Rubber Hoses (not cheap vinyl) 2 rubber & 1 braided rubber •Medium production work •3 piece cable w/ cover and adapters •Made in the USA •Long back cap, 1 collet, 1/16 tungsten, collet body & alumina cup Accomodates tunsten electrodes from .020 to 1/8 . SKU:ADIB0094HOXVM
-
WP-20-25R Style TIG Torch TIGMASTER Water-Cooled 250A 25 Use the one the professionals use •250 Amp Water-Cooled •Rubber Hoses (not cheap vinyl) 2 rubber & 1 braided rubber •Medium production work •3 piece cable w/ cover and adapters •Made in the USA •Long back cap, 1 collet, 1/16 tungsten, collet body & alumina cup Accomodates tunsten electrodes from .020 to 1/8 . SKU:ADIB0094HOXVM

LINCOLN ELECTRIC K1782-1 MAGNUM PTA-17 TIG TORCH (12.5FT 1PC)
LINCOLN ELECTRIC K1782-1 MAGNUM PTA-17 TIG TORCH (12.5FT 1PC)
Lincoln Electric Air-Cooled TIG Torch include characteristics like: Application: For TIG Welding.FeaturesApplication: For TIG WeldingIncludes: 12.5 ft. HoseItem: Air-Cooled TIG Torch
-
Item Type: MAGNUM PTA-17 TIG TORCH (12.5FT 1PC)Brand: LINCOLN ELECTRICManufacturer Part Number: K1782-1Made in the United StatesIncludes: 12.5 ft. Hose

Lotos 5 Prong TIG Torch (4cm) 13 feet for CT520D and LTPDC200D TT135
Lotos 5 Prong TIG Torch (4cm) 13 feet for CT520D and LTPDC200D TT135
Specifications:Total Length: 12 feet 10 inchesCord Length: 12 feet 2 inchesTorch Length: 8 inchesConnection: 5-prongWeight: 2 poundsKit Includes:1 TorchSize 4,5,6 NozzlesSize 1.6mm, 2.0mm, 2.4mm ColletsOne Collet BodyOne Tungsten Holder
-
Lotos 5 Prong TIG Torch (4cm) 13 feet for CT520D and LTPDC200D TT135

9V Series - 125 Amp - Air Cooled - TIG Torch - 12.5 feet 1-Piece Cable - Dinse 10-25 Connector
9V Series - 125 Amp - Air Cooled - TIG Torch - 12.5 feet 1-Piece Cable - Dinse 10-25 Connector
SÜA offers this piece of equipment that has been manufactured using the highest quality standard in raw material selection and manufacturing procedures. This products is NOT manufactured by Lincoln®. Lincoln® is a registered trademarks of Lincoln Electric. Mundaka Technologies is not affiliated, associated, authorized, endorsed by, or in any way officially connected with Lincoln Electric or any of its subsidiaries or its affiliates.This products is NOT manufactured by Miller®. Miller® is a registered trademark of Miller Electric Mfg. LLC. Mundaka Technologies is not affiliated, associated, authorized, endorsed by, or in any way officially connected with Miller Electric or any of its subsidiaries or its affiliates.
-
125 Amp fully assembled 9 Series Air-Cooled TIG Torch with Valve, designed for welders with or without Gas SolenoidChoose between Dinse 10-25, Dinse 35-70 or Stud Connectors. Dinse connectors come with 18" gas hose with 5/8"-18 RH Male Argon Fitting and Stud Connector has 5/8"-18 RH Female Argon Fitting (Please check Picture #2 for dimensions and Table in Picture #3 for a list of compatible welders)Available with 12.5 or 25 feet Cable and Straight or Flexible Head. Torch head with Valve for a manual closure of argon flow. Compatible with Weldcraft, Miller and Lincoln WP Series TIG TorchesAccessory Kit and Heavy-Duty Nylon Cable Cover are IncludedOther accessories might be needed to connect the argon line to your welder or flowmeter. See picture #7 for additional items available.

TIG Torch Power Cable - Model: 57Y01-2 - 12.5 feet - 2pc for 9 and 17 Series TIG Torches
TIG Torch Power Cable - Model: 57Y01-2 - 12.5 feet - 2pc for 9 and 17 Series TIG Torches
High-quality TIG torch power cables for Air Cooled WP Series TIG Torches.Two models available: 1-Pice and 2-Piece | Two lengths available: 12.5 and 25 Feet.Available for WP-9, WP-17 and WP-26 Tig Torches Compatible with Weldcraft/Miller and LincolnSelect the size option and check Picture #2 for dimensions and compatible TIG Torch heads and adaptorsYou will receive 1 (one), TIG Cable. Select your Model in the Size menu options.SÜA offers this piece of equipment that has been manufactured using the highest quality standard in raw material selection and manufacturing procedures. This products is NOT manufactured by Lincoln®. Lincoln® is a registered trademarks of Lincoln Electric. Mundaka Technologies is not affiliated, associated, authorized, endorsed by, or in any way officially connected with Lincoln Electric or any of its subsidiaries or its affiliates.This products is NOT manufactured by Miller®. Miller® is a registered trademark of Miller Electric Mfg. LLC. Mundaka Technologies is not affiliated, associated, authorized, endorsed by, or in any way officially connected with Miller Electric or any of its subsidiaries or its affiliates.This products is NOT manufactured by Weldcraft®. Weldcraft® is a registered trademark of Miller Electric Mfg. LLC. Mundaka Technologies is not affiliated, associated, authorized, endorsed by, or in any way officially connected with Miller Electric or any of its subsidiaries or its affiliates.
-
High-quality TIG torch power cables for Air Cooled WP Series TIG Torches.Two models available: 1-Pice and 2-Piece | Two lengths available: 12.5 and 25 Feet.Available for WP-9, WP-17 and WP-26 Tig Torches Compatible with Weldcraft/Miller and LincolnSelect the size option and check Picture #2 for dimensions and compatible TIG Torch heads and adaptorsYou will receive 1 (one), TIG Cable. Select your Model in the Size menu options.

17V Series - 150 Amp - Air Cooled - TIG Torch - 12.5 feet 1-Piece Cable - Dinse 10-25 Connector
17V Series - 150 Amp - Air Cooled - TIG Torch - 12.5 feet 1-Piece Cable - Dinse 10-25 Connector
SÜA offers this piece of equipment that has been manufactured using the highest quality standard in raw material selection and manufacturing procedures. This products is NOT manufactured by Lincoln®. Lincoln® is a registered trademarks of Lincoln Electric. Mundaka Technologies is not affiliated, associated, authorized, endorsed by, or in any way officially connected with Lincoln Electric or any of its subsidiaries or its affiliates.This products is NOT manufactured by Miller®. Miller® is a registered trademark of Miller Electric Mfg. LLC. Mundaka Technologies is not affiliated, associated, authorized, endorsed by, or in any way officially connected with Miller Electric or any of its subsidiaries or its affiliates.
-
150 Amp fully assembled 17 Series Air-Cooled TIG Torch with Valve, designed for welders with or whithout Gas SolenoidChoose between Dinse 10-25, Dinse 35-70 or Stud Connectors. Dinse connectors come with 18" gas hose with 5/8"-18 RH Male Argon Fitting and Stud Connector has 5/8"-18 RH Female Argon Fitting (Please check Picture #2 for dimensions and Table in Picture #3 for a list of compatible welders)Available with 12.5 or 25 feet Cable and Straight or Flexible Head. Torch head with Valve for a manual closure of argon flow. Compatible with Weldcraft, Miller and Lincoln WP Series TIG TorchesAccessory Kit and Heavy-Duty Nylon Cable Cover are IncludedOther accessories might be needed to connect the argon line to your welder or flowmeter. See picture #7 for additional items available.

CK230 Water Cooled TIG Torch Kit, 300A, 25', Super-Flex, CK2325SF
CK230 Water Cooled TIG Torch Kit, 300A, 25', Super-Flex, CK2325SF
CK230 Water Cooled TIG Torch Kit, 300A, 25', Super-Flex, CK2325SFCK Worldwide Part # CK2325SF• Hand-Held Water-Cooled TIG Welding Torch• 8-1/4" (20.9cm) 3-3/4 oz (106gm)• 2 Series Head AccessoriesCK Worldwide uses a unique head assembly that provides the largest water jacket available in an 18 or 20 series torch. With this type of construction, CK provides over 4 x the surface area for maximum heat transfer versus competitive torch heads! INCREASED COOLING CAPACITY!! Over 4 x the surface area for maximum heat transfer Cooler running torches Longer consumable life Will hook up to standard cables and hoses Fail-Safe hose fittings (no wire ties required). Package of 1 Amperage: 300 AmpCable Type: 3-Piece Super-Flex Rated Output: 300 Amp ACHF or DCSP Type: Water Cooled Head Style: Rigid Head without Valve Consumable Series: 2 Series Torch Style: StandardLength: 25 ft.Torch Series: CK230Gas Valve: Does Not Have Gas Control ValveWhat Series is my Torch? Knowing the series of your torch takes the guess work out of finding consumables and replacement parts.2 Series: torches includes 9, 20, 100, 110, 130, 200, 230FL2L, CKM230, CWH230, WCM230 torches and other popular torches of Weldcraft, Lincoln, WeldTec and Profax with similar models.3 Series: torches include 17, 18, 26, 150, 210, 300, 510, Trimline, FL3L, CKM350, CWHTL300, CWH350, CWM350 and other popular torches of Weldcraft, Lincoln, WeldTec and Profax with similar models.4 Series: stubby consumables are compatible with 17, 18, 26, 150, 210, 300, 510 Trimline, FL3L, CKM350, CWHTL300, CWH350, CWM350 torches.51 Series: consumables are compatible with the CK510 torches.8 Series: torches include 24, 24W, 80, 90, 180, CWH180, CK24W.
-
300 Amp 300 Amp 3-Piece Super-Flex Rigid Head without Valve Does Not Have Gas Control Valve